Products
Building services
Radiant heating
Variotherm Systems - Overview
Variotherm Modular Wall Heating
Variotherm EasyFlex Wall Heating
VarioComp Floor Heating System
Variotherm Heating for Screeded Floors
Variotherm Skirting Heating
Variotherm Ducted Channel Heating
Solar heating
Wood burning stoves
Building envelope
Acoustic insulation
Thermal insulation
Building boards
Building membranes
Building systems
Building interiors
Paints and finishes
Natural flooring
PDF downloads

VarioComp Floor Heating System

Radiant floor heating system ideal for dry construction and rennovations

VarioComp Floor Heating System

With a structural height of only 20mm, the VarioComp Floor Heating System from Variotherm is a new compact floor heating system ideally suited for dry construction and rennovations.

  • Energy-saving low temperature system
  • Easy and quick installation
  • Decades of trouble-free operation
  • Structural height is only 20 mm
  • Uses eco-friendly FERMACELL gypsum fibre panels
  • Variomodular pipes guarantee small bending radius and thus an even surface temperature
  • 10 years-warranty with warranty certificate
  • Can be combined with other systems - eg those which are operated by calorific value, condensing boilers, heat pumps and solar heating
  • Variomodular Pipe keeps its bended form even at low installation temperatures
  • Variotherm Pipes are firmly put in place
  • System allows complete freedom of pipe installation
  • Due to the short drying time quick floor finishing is possible
  • Substantially faster-reacting compared with Floor heating systems for cast plaster floors and also floor heating systems for dry construction

Newly constructed or older buildings – Variotherm Floor Heating systems are always an advantage. Rapidly installed they can be used anywhere spreading warmth and comfort in living rooms, sanitary and bath rooms, hallways and reception areas. They all operate as low temperature heating systems thus being highly economical and energy saving.

With a structural height of only 20mm, VarioComp from Variotherm is a new compact floor heating system ideally suited for dry construction and rennovations.

The new Variomodular Pipe is a 5-layer composite pipe with 11.6 mm outer diameter and 1.5 mm pipe wall thickness. It is ideal in its dimensions, minimum pipe friction losses are guaranteed and the pipe is a 100% impermeable to oxygen.

The new Compact Panel is only 18 mm thick. Certified as eco-compatible building material FERMACELL gypsum fibre panel bears the IBO-quality seal issued by the Austrian Institute for Healthy and Ecological Building. With this panel system absolute flexibility is guaranteed.

Installation is simple and fast; the pipe-guiding channels make the installation of the Variomodular Pipe easier than ever before. The new Compact Filling Compound sets new standards in the field of floor heating systems for dry floor construction. It fully embeds and encapsulates the Variomodular pipes guaranteeing optimum heat capacity. It is easily workable: apply Compact Filling Compound, pull off, done. Fast and clean. Due to the short drying time quick floor finishing is possible.

Newly constructed or older buildings – Variotherm Floor Heating systems are always an advantage. Rapidly installed they can be used anywhere spreading warmth and comfort in living rooms, sanitary and bath rooms, hallways and reception areas. They all operate as low temperature heating systems thus being highly economical and energy saving.

With Variotherm Floor Heating you will experience cosy and warm floors –especially cold floors like stone, clinker and tile floors will never be cold again. Variotherm Floor Heatings provide optimum room climate. Due to them being operated with low temperature they are exceedingly economical and can be ideally combined with other energy efficient systems like heatings which are operated by calorific value, heat pumps and solar heatings. Of course they are also flexible.

Stone or tiled floors bring out the best in this heating system. For all “cold” floor surfaces Variotherm floor heating is the ideal solution. It ensures the best possible warmth management and so creates a cosy living environment. Of course it is just as ideal for other floor surfaces which are suitable for floor heating.

The savings begin during assembly: Variotherm floor heating is simple and fast to install. This saves time & money. Operation is really economical, because Variotherm floor heating is operated at low temperatures. It is the ideal combination for energy-saving systems such as gas conversion technology, heat pumps and solar installations.

All systems come with a 10-year guarantee.


System Components
Compact Panel 1000 x 600 x 18 mm
Variomodular Pipe: 11.6 x 1.5 mm
Compact Filling Compound: 25 kg

Compact Panel Variomodular Pipe Compact Filling Compound
...a perfect job

Compared to conventional screed floor heatings the faster surface warming of the Compact Floor Heating is clearly visible.

  • Faster surface warming results in a better regulation of the Compact Floor Heating. The surface temperature of the Compact Floor Heating is higher than of conventional screed floor heatings.
  • Therefore more efficient laying of heating surfaces is possible as lower flow temperatures are needed.
Date publishedTitleFile sizeDocument type
15/11/2006
VarioComp Floor Heating System
Radiant floor heating system ideal for dry construction and rennovations
287 KB Product sheet
15/11/2006
Variotherm Heating Systems - Overview
Radiant wall and floor heating
304 KB Product sheet

To order this product, or to request pricing / quotations, please do one of the following:

- call us at 020-7232-1181
- fax us at 020-7023-3789
- email us at sales@constructionresources.com
- use our online quotation request form.

Our hours of business are Monday to Friday, 10.00 to 18.00.

Copyright Construction Resources 2009 - All rights reserved.
111 Rotherhithe Street, London SE16 4NF   tel  020 7232 1181   fax  020 7023 3789
info@constructionresources.com    www.constructionresources.com